...pins in the USB socket back into place and now the phone charger works ok. Needs patience, a good magnifying glass (My wife has one of those big ones that you see in beauticians) with a backlight and ...
HTC wont Start, Battery to low, Turns Off When i tried to turn on i cant, soIplug it to the charger or to the USB, and it turns on, and either turns off when it gets to the windows screen, or it gets ...
...charger in there is connectors, you will be able to see the pins.. on the outer part of this is 2pins barely visable, you need to get a pin and pull the connectors out a little. only a little as you ...
...started to shut down..and now doesnt want to switch on or even show if the charger is plugged in..what must i do??? it cant be the coupling down and you can fixed just if you change the pins at a ...
the charging pin got out . what am i supposed to do Go to the mall and ask for a enw charger. If its on the Phone - go to the phone service shop and have it FIXED
Question about HD2 T8585 T8588 OEM MICRO USB ADAPTER DATA/CHARGER PORT REPLACEMENT REPAIR PART
...pins are now bent; I need to replace the socket; Are replacement sockets available? How challenging is it to replace? If your not an expert at replacing phone parts i recommend you dont do it. since ...
...charger unit, check the voltage at the pin. Now remove the battery and check the voltage, check the charge voltage at the pins of the battery terminal in the phone. If there is no voltage then there ...
htc wildfire not fully charging always show the led red When want to charge htc wildfire it is better you turn the phone of before charging. Plug in the charger and charge for about 20mins to 30mins ...
Question about Windows Phone 8X
...are bent. If they are, take a pin or needle and try to make them line up with the rest of the pins. If there are none bent, check the end of your charger the same way or just try a different
...charger or cord. Obstructed/bad dock connector Inspect the 30-pin dock connector at the bottom of the iPhone for dirt, lint, and damaged pins. Clean out the dock connector very carefully with a tooth ...
Usually answered in minutes!
1,226 Questions
1,066 Questions
491 Questions
371 Questions
233 Questions