Questions & Answers for: belt dressing

washer did the same thing. I put some belt dressing on the belt (the belt is on the very bottom, no disassembly rquired). The belt dressing I picked up at the local auto parts, and this seemed to help

...belt dressing' that can be sprayed on the belt (it's an aerosol spray can) which may solve your problem. The problem is usually the belt becomes 'glazed' and a slight slippage can make the noise you ...

belt dressing and spray on belt Sounds like belt is worn. Recommend not using belt dressing however. Dressing often contains softeners that in the long run are not good for the belt. They also attract

...are the same age it wouldn't hurt to replace both of them, spray them with a belt dressing before installing new belts. You can get this dressing at Autozone and possibly the belts too. Good

...belt dressing. First check the belt cracks (not more than an inch apart) if so, replace belt. Next, check belt alignment making sure there is no slight curve anywhere. Next, take the belt off and ...

...It needs to be replaced. Belt dressing is a scam, it might have worked in the 60's, but in this century it ruins belts. The tensioner may be bad/stuck. You will need to replace the belt

belt dressing for car fan belts works wonders. **unplug it while you apply belt dressing! There is usually a tension adjustment by moving the motor mount back a small amount. Don't over do the tension

...belt dressing and spray the belt(with engine off) and the noise will go away. check the belt to see if it is tight and is in good condition.If your engine has just one belt the belt dressing should ...

belt how to remove belt dressing from serpentime belt Remove the belt & use mineral spirits Best to just replace the belt No belt dressing should ever be used on rubber

...Belt-Dressing, 170-g Canadian Tire www.canadiantire.ca > Automotive > Car Cleaning MotoMaster Belt-Dressing stops belt slippage and squealing For use on automotive, marine, industrial and home. You ...