Questions & Answers for: belt broke alternator pully

...belt we've put on and it broke again just wondering if any one knows why Either you have a pully that has a bad bearing, or the belt tension is going bad. One of the two will cause this. You probably ...

belt broke, there's no sticker under the hood that tells you which bolt adjusts the tension first you need to figure out if you have an automatic tensioner or an adjustable one. so look at the pullies

...belt just broke from being old, just replace it. but check all of the pullys to make sure they spin relitivly easy. if you find one that dosen't spin easily, it could need replaced too. check ...

...broke my serpentine belt. it was running when it broke First verify that the belt is on correctly. If the belt is around the water pump the wrong way it will spin the water pump backward and not ...

...it will show you how the belt is routed on the van. If it is the alternator belt that broke, just remove the bolt holding the altenator up on its bracket and then remove the old belt off the

...belt broke and the alternator is not working leaving the vehicle running off the battery and it is not being charged. Sounds like loose belt. If it has a serpentine belt it has a bad tensioner ...

...belt broke...I replaced it now car won't start.....the belt doesnt even turn. I checked the starter & battery & they are fine??? something is seized up idler pully, alternater,

belt broke. Replaced the serpentine belt and now when I turn the car on and run it, it makes a clicking sound. I spoke with someone at Advance Auto Parts where I bought the belt and they said it could

belt broke, replaced it and broke again. Smelled burnt, what could have seized and how can you check One or more pulley(s) is not sniping correctly. Check one at a time starting with With engine OFF /

belt broke on my 2002 ml270cdi and I replaced it, and it broke again. I haven't even driven up to a mile. Please advice. by the sound of it your belt has broke due to either a seized pully or a seized