Questions & Answers for: Harley Davidson FLHTCUI Electra Glide Ultra Classic battery replacement

Replacing the battery How do I replace my battery? 1. Visually inspect the battery connections and note the location of the positive (+) and negative (-) terminals. 2. Disconnect the negative (-) ...

bike cranks and wont start had weak battery jump started with truck. battery wouldnt charge so i replaced battery.bike started and ran great. next day tried to start , it back fired and wouldnt start.

Battery Replacement 2003 Ultra Classic E-Glide (100 aniversary) Hello, My battery broke down - no more power. Which types of batteries can you recommend for replacment? What about the bike´s ...

Pucrchased 2001 ultra classic. Battery would not stay charged. Replaced battery and still would not keep charge. Replaced ststor and voltage regulator. Rode 750 miles and stator went out. What would c

...Hi Jday53, perform the following tests: 1. Fill acid type batteries to proper levels. 2. Charge battery overnight at 1-2 amps you need 12.5 volts or better after charging. 3. Hook up battery ...

2001 Electraglide Ultra..battery won't charge. Where do I test the output of the Volt. Reg.? Battery died while driving home. Charged battery ran bike, checked voltage at the battery, 11.2V.. Not ...

battery drain Hi Anonymous, perform the following tests: 1. Fill acid type batteries to proper levels. 2. Charge battery overnight at 1-2 amps you need 12.5 volts or better after charging. 3. Hook up ...

intermittent alternator my 2007 classic will have the engine & battery light come on with volt meter dropping from 14 to 10 volts. within 10 min. it goes normal. Hi Denny, perform the following tests:

...Hi Anonymous, perform the following tests: 1. Fill acid type batteries to proper levels. 2. Charge battery overnight at 1-2 amps you need 12 volts or better after charging. 3. Make sure all ...

... Hi Anonymous, perform the following tests: 1. Fill acid type batteries to proper levels. 2. Charge battery overnight at 1-2 amps you need 12 volts or better after charging. 3. Make sure all ...