Questions & Answers for: battery clamp

Question about 2000 Focus

1 Answer

...battery clamps, try to twist the clamp with your hand. If it moves it is not tight enough. I've often see cars with battery post to small for the clamps. If it's loose and you can't tighten it any ...

Ad

...clamp on battery. Ditto to Positive clamp. ( Do it in this order !.) With 10mm socket, undo battery holder clamp in front of battery and lift away clamp and nuts. Lift away battery. Install new ...

Ad

Question about 1998 7 Series

1 Answer

clamp from battery. There will be one or two 10mm nuts holding the lower securing metal clamp that stops the battery from moving around. Remove these and lift out securing plate then lift out battery.

...makes the clamp grab the terminal before it goes all the way on. You can now remove the wires from the battery and clamps, loosen the clamps and, without removing them, fit them correctly. Good

Question about 2005 Montana

1 Answer

...battery and the other end red clamp to the positive terminal (+) of the dead car's battery . 2. Connect one black clamp to the negative terminal (-) of running car's battery and the other end ...

Question about 2005 Montana

2 Answers

...carry universal clamps. Cut the old one off, strip back the insulation. Place the exposed copper into the opining in the clamp and tighten it on the wire. Replace the clamp on the battery as

...battery clamp. Simply loosen the clamps by turning the clamp nut counter clockwise. Then take a pair of channel locks or pliers and twist the clamp back & forth to free it up. They will lift ...

...battery clamp from the parts store. As long as it is made for top posts you will be fine. Now take some diagonal pliers and cut as close to the original clamp as possible. Throw the old clamp away. ...

...battery clamp from 2007 Ford Edge ??? All cables are removed from the battery, but it seems that there is a Clamp on the battery, and how to remove that Clamp is my question ??? behind the battery is ...

...clamp to get the battery out. To refit, position the new battery the same way around as the old one. Tighten the clamp that's down the side to hold down the battery. Refit the RED (positive) terminal ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...