Questions & Answers for: Dodge Intrepid battery cable

Question about 1995 Intrepid

1 Answer

...battery are any good please help me with this. A good way to check to see if your alternator is working is start your car and remove the negative cable while it's running. If it dies, the alternator ...

Ad

Question about 1994 Intrepid

1 Answer

...the charger to the positive ( + ) side of your battery and the black cable to the ( - ) sid of the battery. hope this helps you and good luck. remember to take the time to rate the responses you

Ad

Question about 2004 Intrepid

2 Answers

...cable ends from the battery terminals with a battery terminal puller. Take off the negative terminal first. Slide the battery toward the wheel well and remove it from underneath the wheel well. Use a ...

Battery Cable Raise vehicle. For easier servicing, do not remove the wiring from starter at this time. Remove three starter attaching bolts from engine/transaxle Starter - Remove starter assembly from

Question about 2001 Intrepid

3 Answers

...battery cable terminals should be 12 volts, if not remove cables, clean the battery posts and cable terminals till shiny clean and refit, if voltage ok check for faulty fuses or circuit breaker . ...

Question about 2001 Intrepid

1 Answer

battery cable. Raise and safely support the front of the vehicle on jackstands. Fig. 1: Disconnect the negative battery cable Remove the three bolts attaching the starter to the engine/transaxle. Fig.

...cable ends from the battery terminals with a battery terminal puller. Take off the negative terminal first. Slide the battery toward the wheel well and remove it from underneath the wheel well. Use a ...

...battery cable first, and then the positive cable The hardware securing the battery to the tray The battery cover, if so equipped The battery from the tray To Install: Position the battery on the tray ...

Question about 2004 Intrepid

1 Answer

...cable leaves the battery and bolts to vehicle ground, not the starter. the positive cable leaves the battery and bolts to the starter. make absolutely sure you have the right cable in mind before you ...

Question about 2004 Intrepid

1 Answer

this wire and what is it connected to STARTER AND ALTERNATOR. FAULTY STARTER OR LOOSE BATTERY CABLE POOR CONNECTION CAUSE MORE CURRENT DRAWING AMPS INCREASE COULD MAKE POSITIVE BATTERY CABLE OVER HEAT

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...