Questions & Answers for: GMC battery cable

Question about 2008 Yukon

2 Answers

...battery cable (black cable) off first and move it to the side where it wont touch the battery or anything metal. then loosen and take off the positive (red) cable off and then just loosen the battery ...

Ad

...cable from battery and use jumpers to cables. If this works, connections are bad. remove cable from battery and clean both cables and battery(cheap help is a can of coke and toothbrush). If that does ...

Ad

I have a 2007 GMC Envoy. I've had to jumpstart the SUV for the last 2 days. Could it be the battery? Either the battery, the battery cables/connections, the alternator or alternator cables/connections

...battery cable or terminal end. the easier way to figure this out w/out checking the voltage drop across a whole battery cable is to affix the jumper cables strategically to find the bad one. Put ...

...battery post and cable cleaning tool. Check the cables for swelling or breaks. If after replacing the battery, cleaning the connections, and inspecting the cables, it still will not turn over, then ...

Question about 1998 Sierra

1 Answer

BATTERY CABLE. SOUND LIKE WEAK BATTERY OR STARTER MAKE SURE BATTERY CABLES CLEAN AND TIGHT.IF BATTERY GOOD REPLACE BATTERY CABLES.CHECK STARTER MAKE SURE STARTER SOLENOID AND STARTER OKAY.YOU CAN HAVE

...cable terminal to the GOOD battery Negative - terminal. 5. Attach the last jumper cable Negative - terminal to a heavy metal ground part of the engine and NOT to the dead battery Negative - terminal. ...

Question about 1995 Safari

1 Answer

battery cable to starter. If voltage good at starter, (at least 11.5 Vdc), you could have a bad engine ground. Follow negative cable (black one) from battery to where it bolts onto engine. Remove bolt

battery cables and post has corrossion  clean corrossion from both cables and post using small steel brush clean battery post with.first turn off radio before disconnecting negative battery cable

...in the battery. Get a new battery. Starter? Cable could be touching the frame as insulation can break off older cables when moved. Cables could be installed wrong on starter, or rvrsed on the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 GMC Envoy
2004 GMC Envoy

2,225 Questions

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

2003 GMC Envoy
2003 GMC Envoy

1,368 Questions

2002 GMC Envoy
2002 GMC Envoy

1,418 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...