...Base works good. Sounds like a defective battery or low battery. 1. Have you replaced the battery? 2. Have you changed the channel? 3. Have you dropped it? Answer these few questions and we'll see if ...
...battery from base handset. 2. ON the Extension phone - unplug from wall and unplug battery from handset. 3. Wait AT LEAST 5 minutes. 4. Plug back in BASE power. 5. Plug back in BASE phone line. 6. ...
Question about 86709 Atomic Wall Clock
88900 Atomic Clock does not read time and temperature. I replaced batteries on both clock and wireless temp tramspounder 4 days ago. I am still waiting for time and temp to be set on my clock. I ...
Question about 27992GE5 Cordless Phone
...battery, try disconnecting the base telephone line and ac adapter for a while (1/2 hour or so if possible). Remove the battery from the handset as well. After 1/2 hour, install the battery in the ...
Question about VTC-VT-I5853 Cordless Phone
i have a vtech i5853 base and 4 other phones and i've this system for about 5 years. the phone batteries all went dead within a couple of months. i ordered new batteries thru manufacturer and now i ...
Question about VOIP3212S/05 IP Wireless Phone
the base unit for my Philips VOIP3212S is not charging the phone I need to buy a replacement base unit. I put ordinary batteries in the phone and the base unit no longer works Wilson - The phone was ...
I get Warning! use rechargeable batteries only. But they r rechareable, and changing them doesn't help Reboot the base :-Make sure the handset is HF and not on the base.-Disconnect the base ...
Base Station Battery Installation ·Remove the printed vinyl label from the LCD screen of the base station ·Position the remote sensor near the base station ·Open the battery compartment at the back of
Question about E5965C Cordless Phone
Bought inside/outside wireless weather station. Inserted batteries as directed. Inside works, outside temps don't register at all. Make sure that the channel (1,2,3) agrees between the sender and base
Question about E5965C Cordless Phone
...battery. If after the reset the base can't make/receive calls, its likely failed. If the base works and the remote still reports base power issue, could be either base or remote. The manual is at the ...
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions