Questions & Answers for: Jabra base

...green, the LED gets black after appx. 20 minutes and I cannot synchronize the headset with the DECT base station, the headset gives no noise, the red LED on the headset does not blink or anything. It ...

...changing the a-g channels but nothing still? Put the headset in the cradle, press the button the base with the >< picture and hold till the blue light on the headset lights up then

...cannot find a port to plug in the charger It should have come with a small 45 mm diameter cradle base unit which the mains has a 1.4 mm jack plug plugs in and the headset rests in. Look for it on ...

...an alarm when I cross the line and I can not shut it off or start using it until I go back to the base and set it there. I need to be able to shut that alarm off and reset it remotely, so I don't ...

...if you're not within hearing distance of the desk phone (but within the 300 foot range of the base) you don't know if the desk phone is ringing, so you can't answer it, even though ...

echo the voice is low at my end and at the other end they hear an echo of their own voice have you tried changing the channel within the headset base?

jabra gn9350 base lights are not coming on. There are a number of steps you can try to fix this issue:1. Confirm the power supply is plugged in correctly, and the power socket to which it is connected

How do I unmute my Jabra GN 9330? It has the red "lips" lit up at the bottom of the base. You have the small switch on to off the ear piece that you use to adjust the volume, this also ...

i have a constant beeping on my jabra headset gn 9350 headset not syn'd with base, replace headset in base and remove power from base count to 10 re-power base allow set up to complete, green lights ...

...headphones (wireless) have a tuning wheel that allows you to find your headphone channel pair to base set. It sounds that while checking your foam ear piece you may have moved this dial / wheel. ...