Questions & Answers for: barrel fuse

barrel with the tip on the end over the fuse. When you press on the tip, it should push in a little and spring back out. If you lost the pieces, you'll need to purchase another charger. - Jim SHARCNET

no 12v power from fuse box to ignition barrel :-( no power from fuse box to ignition barrel :-( 1989 Honda Civic check your fuse links with a test light sonds like a fuse link blew

...barrel jam in place. or Could be your anti-Theft System failed (including, but not limited) fuses, wirings, etc. If you have one. or So check the fuse boxes (one in the cabin & the other in the ...

...current capacity needed and your own preference. For draws of less than 100 amps expect to use a barrel fuse. For currents larger than that you'll probably be looking at the more expensive wafer

fuse 406 is prone to damaged internal contacts in the ignition key barrel, one of the cables there supplies power to the heater blowers. What happens is there is a large supporting clip that takes the

barrel turns no heat-new fuse-same-new element-same. Old element burned could new fuse pop and I need new one Barrel turns no heat. Put in new fuse, no heat. Put in new heating element no heat. ...

Fuse Keeps Blowing Right where to start? :/ My Bike got stolen about a month ago, the Speedo Got smashed and the barrel was snapped, i managed to fix the barrel back in place and glued the Speedo back

does my LG Tromm WM2277HW have fuses the machine will not turn on. But when i spin the barrel by hand the lights turn on only until the barrel stops, then every thing turns off and the power button ...

...any fuses my machine has no power. when I push the power button, nothing happens. if i spin the barrel by hand the panel lights come on only until the barrel stops, the power button works while

fuse, or your ignition switch is bad. Naturally...check all master fuses.....but like all these answers say, it is most likely the ignition barrel. It happened with my 2002 Ltd PT. Same thing exactly.