Questions & Answers for: bar oil leaking chainsaw

...the chain slot. Are you using motor oil instead of bar oil? Make sure there is nothing to prevent bar from making close contact with oiler port in case. Reassemble all parts and adjust chain

The oil tank may be leaking at the tank opening for the pickup tube. If oil appears at the oiler port, then there may be dirt/blockage within the oil passages in the bar end. Clean with compressed air

...bar oil out of the bottom of the chainsaw as soon as i put it in. what could be the problem? I would say the tank is cracked, take the bar and chain off, fill the oil tank with fuel, this will leak ...

...bar oil when hot hi,when saw gets hot alot of what seams to be chainbar oil is leaking out round chain sproket As the oil gets hotter it becomes more viscous, so if there is a leak it will get worse, ...

oil leaks from the bar oiler when not inuse on Husqvarna 268 Oil leaks from chain bar oiler Try THICKER oil like straight 30 weight

...oil go into the bar channel. Take the side cover and bar off the chainsaw and clean where all these parts meet. Sometimes it will not leak as much. If you store a saw in a place that has temperature ...

chain saw setting not running the bar oil leaks out, but doesn't if laying on its side what kind of saw? where is it coming from? all saws will leak some bar oil so how bad is the leak?

bar oil, so i put a threaded plug in the hole, and when i get the plug far enough in, it impedes the oil flow to the bar. Take the bar off and clean all the pieces and parts where the bar mates to the

...bar oil comes out very fast and leaks out. I've taken off the bar, chain, and cover so after starting it up I can see the bar oil coming out of a hole. sounds like the small oil feed pipe inside oil ...

bar mount. It seals the oil passage from the tank to the bar. It will leak there. The tank itself may have developed a crack that will leak. The rubber lines from the tank to the pump can leak if they