Questions & Answers for: bar oil chain leak

...the chain slot. Are you using motor oil instead of bar oil? Make sure there is nothing to prevent bar from making close contact with oiler port in case. Reassemble all parts and adjust chain

Ad

bar oil channel I imagine that the oil tube and or drip hole for the chain is plugged up. Remove the bar & clean up all the wood chips, etc to see if the bar oil is working. It can also be the hose or

Ad

Question about 1630 16" Chain Saw

1 Answer

...bar oil we have a poulan farm hand chain saw and when we put it in the case to store it and go to bring it out again, there is a pool of bar oil there i cannot find why it keeps leaking when we store ...

...bar and chain, then remove the excess oil and debris. Start the engine and look for oil oozing out of a port near where the bar fits to the case. Any spills while filling the oil tank will allow oil ...

Question about ZR10926 16 Chain Saw

1 Answer

...bar drive-end small oil-channels that bring oil to the chain groove on each side of the bar. Also, clean the entire chain groove. Refit the bar, chain, and cover leaving the fasteners finger tight. ...

Question about 1630 16" Chain Saw

1 Answer

bar oil leaking after use Release the chain brake, back off the chain adjustment screw several turns, then remove the side cover and the bar/chain. Clean the engine side case where the bar fits to and

Question about Chain Saw 20" Bar

1 Answer

...bar oil is leaking out bottom of motor housing, but not getting to chain. Remove the bar and chain. Clean all parts exposed including the bar drive-end small oil channels that feed oil out to the ...

Question about Chain Saw 20" Bar

1 Answer

bar fits. Does the oil port itself leak or is it coming from the engine case? If from the case, it may be a loose or split line from the tank or it could be a cracked oil tank. If the tank is cracked,

bar oil all over everything except the chain. bar is clean but oil dosent seem to get to the chain bar oil leaks or urns all over but dont seem to get on chain. ooil comes out of saw where its suppose

Question about Chain Saw 20" Bar

1 Answer

...bar oil leak I have a 16" Ranger chain saw and the bar oil is constantly leaking out of the port where the chain is, even when the saw isn't on. When filling the bar oil the oil just ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...