Questions & Answers for: Dodge Magnum bank1 sensor 1 location

Question about 2006 Magnum

1 Answer

trying to find the iaf sensor on dodge magnum sxt 07 It is a small two wire sensor plug located on the intake pipe near the MAF adapter plug. The intake Pipe is the biggest pipe you will see under the

Ad

Question about 2006 Magnum

2 Answers

1 sensor 2). I changed out the O2 sensor on the driver's side after the cat (figuring that the driver's side would be bank 1). I reset the code (disconnecting the batteries neg terminal) and drove for

Ad

...on my 2006 magnum r/t, what is this? O2 sensor 1/2 circuit high, which means shorted, return voltage shorted, O2 sensor, or PCM. my money is on O2 sensor for bank 1 sensor 2. let me know what ...

where is the oil pressure sensor switch located and can I replace it myself? From what I can find, it's located under the engine. You can replace this yourself. There is a wire connector attached to ...

Question about 2005 Magnum

1 Answer

Where is the camshaft position sensor located in my 06 dodge magnum? And is there anything special i may need to know in order to replace it myself? The camshaft position sensor, it is on the ...

1999 DODGE, V8 MAGNUM 4X4,OXYGEN. SENSORS, LOCATION Oxygen sensors are behind the catalytic converters in the near mid section of the exhaust.

Question about 2005 Magnum

1 Answer

sensor 2/1 Circuit HighPossible causes- Front Heated Oxygen Sensor Bank 2 harness is open or shorted - Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection - Faulty Front Heated Oxygen

...is upstreamThe second number is also, but the other bankThe rear sensors are called MonitorsThey are S21 &S22So your 12 is upstream sensor, opposite bank or side of engine of the #1 ...

Question about 2007 Magnum SRT8 Wagon

1 Answer

...bank1 sensor 2, but Id like to know where all 4 are. If your car has 4 O2 sensors, there should be two located on the rear of the motor by the exhaust pipe where if enters the engine. And the other ...

...Bank1... It could be the result of bad gas or if you used fuel with a higher content of Ethanol. It could also mean that the post cat. converter O2 sensor on the driver side is bad. I would try ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...