Questions & Answers for: Chevrolet Venture bank1 sensor 1 location

Question about 2003 Venture Passanger

1 Answer

...1 Sensor 1 Hello dillonca: My name is Roger and I will help you. There should be two sensors. One in the exhaust manifold back by the firewall. This is sensor 1 bank one. The other is behind the ...

Ad

...my 2003 chevy ventue? Need a 7/8 open end wrench or a o2 sensor socket. Located in exhaust pipe. The one closest to the engine is Bank 1 Sensor 1. The ones located downstream and known as "Sensor

Ad

Question about 2003 Venture Passanger

1 Answer

trouble code on a 1998 chevy venture p1133 whers it located at tks.. p1133 is 02 sensor, bank 1 sensor 1. thanks

...after the cat. Since that year only has one O2 before the cat it would be called bank1 sensor 1. It is located before the cat in the exhaust manifold on the back side of the engine (firewall

Question about 2000 Venture

1 Answer

were is the temp sensor on bank 1 2000 chevy venture Fig. Showing the locations of the HO2S 1 (Sensor 1) Hope helps (remember to rate this answer).

Question about 2003 Venture Passanger

2 Answers

...sensor described as bank1 sensor1. Is that the one located in the front near the oil filter? i have no idea here as never seen this vehicle but if its a V engine then i would assume its front left ...

Question about 2000 Venture

1 Answer

what does code mean? po171 Lean mixture detected at oxygen sensor (bank1)  Remove mass air flow sensor (MAF) and spray clean with electrical or tuner cleaner. Most times that's all it takes.

Question about 2003 Venture Passanger

1 Answer

...1 and bank 2 sensors I have written a couple articles that cover subjects including oxygen sensors, oxygen sensor codes, and oxygen sensor locations.  I recommend that you ...

Question about 2003 Venture Passanger

2 Answers

bank1, sensor 2. Your P0141 code is the oxygen sensor on the exhaust system that is almost directly under the passenger seat.Look under the van at that location and you will see it just to the rear of

...malfuction bank 1 sensor-1 where is it located? code po135-02 sensor heater circuit malfuction bank 1-sensor 1,where is it located? It's the oxygen sensor screwed into exhaust manifold on driver

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...