Questions & Answers for: Lexus RX 300 bad struts

Question about 2000 RX 300

1 Answer

...moving up and down pretty good and then push down one last time and stop. If the struts are good, your car will bounce up then down and then stop. If it keep moving more than that, the struts are

Ad

Question about 1999 RX 300

1 Answer

...struts I had the same problem - you need to replace the strut mounds - there was a recall on the mounds for the same problem.... my noice was very very bad - and once I did that it was all over, talk ...

Ad

how to replace rear struts on a lexus RX 300? You can refer to one of the member "Lexmex" post at Club Lexus forums. http://www.clublexus.com/forums/rx-first-generation/327873-shocks-kyb-gr-2-a.html I

...bad. Any danger? thanks Noise is not a danger, but if the car starts to bounce allot then it becomes a safety issue, at that point the struts have to be replaced, they must be done in pairs only.. I ...

Question about 1999 RX 300

1 Answer

when braking hard , the front end kinda shimmies a bit , you can feel it in the steering wheel! I'm thinking struts! the rotors are pretty new, brakes are good! rotors are warped have them turned

RIGHT FRONT STRUT LEAKING AND RIDE IS DEFINITELY AFFECTED. IS IT NECESSARY/SMART TO REPLACE BOTH FRONT STRUTS IF YOU HAVE TO REPLACE ONE??? might as well if ones gone the others bound to go soon ...

How much will it cost to get my struts replaced between 350-550 hundred dollars per axle ( two struts ) depending on where you live

noise coming from control arm i av recently change all front parts an control arm bushing but noise still there. The noise comes mostly wen vehicle is moving slowly, the year of my vehicle is 1999 ...

Do I need to replace the upper mounts when replacing rear struts on a 2000 Lexus ES 300. Car has 100,000 miles. Am told they have a bearing in them. One quote says Yes to replace, the other says No ...

How do I replace a rear upper strut mount and bearing on a 1999 Lexus RX300 Remove the struts & then have a repair shop change out the top bearing plate,do both sides, then have it aligned You can

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1999 Lexus RX 300
1999 Lexus RX 300

449 Questions

2001 Lexus RX 300
2001 Lexus RX 300

362 Questions

2000 Lexus RX 300
2000 Lexus RX 300

334 Questions

2002 Lexus RX 300
2002 Lexus RX 300

149 Questions

Manuals & User Guides

Loading...