Questions & Answers for: Maytag bad struts

struts, motor and such are fine. If you take the silver pane on the back off, hopefully the service guy did not take the troubleshooting guide. Here you can see where the problem is. (need to be a bit

...bad it kicks off the machine with error UD All at once, this Neptune TL FAV6800AWW failed to spin out on any cycle due to excessive wobble. This machine has an auto load balance feature and goes thru ...

...is banging again the chassis, this can cause oil leak, and machine shaking. The most common is a bad bearing. I had this problem for years. My laundry is on the second floor and finally the ...

struts have gone bad. I'm not a mechanical guy though, so I don't know how I can tell if they are bad. They do not appear to be leaking, as there is no fluid or anything that I can see that has leaked

Very loud noise during spin cycle Very loud noise on front loading maytag (netune)during spin cycle like bad bearing. Probably a broken strut or support. some call it a shock absorber.

...bad struts cause this problem? yes bad struts can cause this problem also if you have it on carpet you would be better off cutting a piece of plywood for it to sit on as it will shake when sitting on ...

NOTE!!! A bad boot is often an indicator of other part failures, most common of these are the shocks/struts that are under the drum assembly. If these are bad, your new boot will go bad quickly.******

washer shakes bad Washing machine shakes bad we have change the strut but that did not help. You probably have already checked this but since you do not say......... Is the unit solid and level on the

...struts go bad? The machine is constantly out of balance. Drum seems very loose. UC error code. Machine is apart top and front are off. Strut system seems like a joke and very expensive. Why do you ...

strut instelation maytag mlg2000aww struts bad go to appliancepartspros.com or repair clinic.com. they have excellent videos for just that