Questions & Answers for: bad fan mitsubishi dlp

Question about WD-52725 52". Rear Projection HDTV

Mitsubishi DLP overheating

bad. They extended the warranty for several sets. The sensor is right by the lamp. Call mitsubishi and insist they do something for you. If you keep playing your set, the bulb could also be at risk. I

Question about WD-62725 62" Rear Projection HDTV-Ready Television

1 Answer

Dlp wd 62725 will power up then when i turn it on makes a noise

...fan hitting its shrout or something like that. and no pix. flashing yellow light . after a few mins of making this noise. can anyone help ? One of the cooling fans is bad. You have to isolate which ...

Question about WD-62327 62" Rear Projection HDTV-Ready Television

1 Answer

Have a Mitsubishi WD-62327 DLP projection TV. It

...hold the input and menu button for 5 seconds it will flash you a code 36 is the lamp fan / dmd fan has gone bad. pretty common. not hard to change but will cost 100 in parts and whatever labor may ...

Question about WD-52525 52" Rear Projection HDTV

1 Answer

Mitsubishi wd60735 code 37

your fans is bad. It would either be the DMD fan, or the lamp fan. Take the back cover off of the set and tape down your lamp safty switch. Turn the TV on and see which fan is not working, and replace

Question about WD-52525 52" Rear Projection HDTV

1 Answer

73" Mitsubishi DLP. turned on the tv and got only sound, no picture. after a minute it would shut down and red light would pop on the front. replaced bulb and hooked it back up. now it turns on but af

...tv shuts of Try cleaning the little fans that keep the bulb cool, the temp sensor will shut it off so not to damage the bulb , the winning sound may be the fan going bad or not working like it

Question about WD-52631 52" Projection HDTV

1 Answer

Mitsubishi tv flashes yellow light

...with a new one from next day dlp IT might not have been the bulb, it could be the ballast, it could be the power supply. The other things that it might be are the fan, the temp sensor or a bad

Question about WD 65837 65 in. HDTV

1 Answer

What does the yellow blinking light mean on Mitsubishi WD65837

...Fan is not rotating 5 Red Blinks, 7 Yellow Blinks - Ballast Problem 6 Red Blinks, 6 Yellow Blinks - Lamp Missing, Bad Cable between lamp and ballast And the Lamp cover must be here somewhere in your ...

Question about WD 65837 65 in. HDTV

1 Answer

I have a Mitsubishi wd-57833 ZI just replaced the DLP chip about a year ago and now when I turn it on I hear a fan turn on and go off 3 times and after the 3rd time it shuts off completly

...the rear panel and found it's the fan that comes on and goes off 3 times and then the unit stays off Lamp or color wheel bad will cause TV to completely shut off and turn on 3 times , then stay

Question about Cinema WD-82740 82-inch 1080p 3D Projection TV

3 Answers

I have an 82" Mitsubishi DLP tv. I have replaced the lamps 3 times and just replaced the ballast. I am still getting 6 red blinks and 1 yellow

...Mitsubishi DLP tv. I have replaced the lamps 3 times and just replaced the ballast. I am still getting 6 red blinks and 1 yellow I hate being the bearer of bad news, had the same problem, and I found ...

Question about Diamond WD-65831 65" Projection HDTV

1 Answer

What part do I need to replace when my DLP tv bulb cracked after I turned off the tv?

DLP chip successfully. Replaced one of the fans. My brand new bulb craked about 20 seconds after I turned off the tv. Hello, all i can say is it may have been a bad lamp, see if they'll warranty it...