...Down of the sentre to the bottom is good Most of the time when you have ghosting problems it is a bad connection on you cable connectors make sure they are tight or maybe they are bad. Interferance ...
external speaker hook-up I have the Akai PDP4298 plasma TV and haveĀ neverĀ used the two speakers that came with the TV (I have always used surround sound speakers), but want to use them now. The back ...
Question about LCT3285TA 32 in. LCD Television
my akai 32 in lcd tv keeps turning off every 2 mins you got a bad power supply with a bad capcitor inside or the tv is overheating but you first want to rule out the power supply in this regard- ...
my tv wont turn on This could be due to a blown fuse in the power supply board. You would need to check using a multi-meter if there is voltage coming into the primary side of the power supply, if not
Question about LCT3285TA 32 in. LCD Television
my akai television wont stay on. it turns off on it's own You have a bad power supply ,most likely the capacitors are bad in the power supply.
problem Part acts as a heat conductor switch they were not solder in Good so after awhile solder is bad
dead - could it be power supply? and what components go bad bad capacitors, etc. http://en.wikipedia.org/wiki/Capacitor_plague Please post back what you find.
Hi, my akai 32 lcd tv turns on but no picture check if you have 24v in ballast board. if you have 24v in ballasts board the board is bad, if not the power suplly is bad.
lens unit isnotworking disply NO DISC Hi First check the strip cable that connect the lens unit and the main system board. This strip wire has carbon tracks as conductors. The strip wire has to ...
.... WHEN I TRY TO CUT IT ON A RED LIGHT FLASHES THEN GOES OUT Hello, The problem is that there is a bad capacitor on the power supply board of the television.Therefore it is going to keep acting that ...
Usually answered in minutes!
255 Questions
269 Questions
227 Questions
221 Questions
201 Questions