Questions & Answers for: Jandy aux fuse

...or replace. I need your help real bad...my pool turn green..... if unit comes on write down all auxs then remove plugs replace fuse turn on then plug one in at a time till it blows then you know ...

...replaced it, still nothing. Could it be something else? its a short replace fuse unplug all the auxs then plug one in at a time the one that pops the fuse is your ...

...all the aux plugs but mark them replace fuse turn on if it still blows need a new board if not plug in auxs 1 at a time till it pops then check out that aux for shorts sometimes the relays short ...

...aux mark all auxes wich goes where unplug all then replace fuse hook up one at a time to see which one blows fuse then check that relay and wiring maybe motor shorting out or lights got water or bad ...

...what is going on? check back of PCB board fuse might be blown if keeps blowing fuses unplug all auxs then plug in 1 at a time till it blows thats whats wrong or check powersupply should be 24 ...

...Aquilink control panel keeps tripping circuit breaker turn off heater if it still happens mark all auxs remove all then try again if it doesnt blow fuse plug 1 in at a time until it does thats whrer ...

...out and the system does not come on. what do I have to do to get the system working? unplug all aux wires put one on at a time until it blows fuse then check that aux might be bad pump or bad ...

...out screws on top panel fold out to see if fuse is blown on back of board if so replace unplug all auxs mark them then plug in 1 at a time if fuse isnt blown need new PCB board check voltage at ...

...AND BOARD FUSE IMMEDIATLY BLOWS. ANY TYPICAL ISSUES THAT CAUSE THIS? OR A BAD BOARD? mark all aux lines with numbers then unplug all plug in one at a time til it blows that's the one that is ...