Questions & Answers for: Toyota Land Cruiser auto wiring

Question about 1983 Land Cruiser

2 Answers

auto electrical hi, i'm looking for a electrical diagram for a fj40 series 1978 model must have external voltage regulator with a 6 plug connection, plus 1 axcilary wire. thanks. what engine? My ...

Ad

...wiring and add a relay to do this. Some twenty years ago I bought a "kit" in the aftermarket auto supply store for this purpose complete with a delay for lighting your path from the car at night. It ...

Ad

Question about 2007 Land Cruiser

1 Answer

...wiring up plugs from car to trailer There should be a pre wired conector for your truck at advanced auto or local auto parts store. These are simple to install and consist of unpluging a connector on ...

...always hot side of the fuse box. Is this a fusible link? Where can a replacement part be found? any auto parts store. find out what guafe wires these links are. If not imprinted on these links get ...

...wiring diagram for TOYOTA PRADO LANDCRUSER 2001 VX-6CYLINDER 3.4LIT.-24VALVES-AUTO TRANSMISSIONS\r\nthankyou very much shafiq E-mail: [email protected] go to www.pdftown.com and download service ...

...wiring issue. Call a local auto parts store (checker, Oreilly, Autozone ect..) They usually offer free battery and alternator diagnostic if you get your car there. If that doesn't find the problem ...

Question about 2006 Land Cruiser

2 Answers

...wiring harnes for the lights... The Auto electric guy might find a spot where several wires are mleted together... Sorry for the bad news and I do pray I am wrong and it is a simple fix... but not ...

...wiring from lever to harness Sorry, I have been in the auto repair business for 37 years and I have no clue what an "indicator lever" is.  Are you talking about a gearshift indicator? a turn ...

...IT RAN REALLY ROUGH LIKE IT WAS MISSING AND IT HAD A KNOCKING SOUND, WAS AWFUL. TOOK IT TO ADVANCED AUTO THEY PULLED A CODE THAT SAID #6 CYL WAS MISS-FIRING. I CHANGED THE PLUG,THAT DIDNT FIX THE ...

Question about 2010 Land Cruiser

1 Answer

...- With ignition switch off, open the driver's door, short the pins 4 and 13 with paper clip or auto wire in Data Link Connector (16 Pin), which is located under the dash on steering wheel

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...