Questions & Answers for: Crate auto gate openers

loss of power while playing I have a crate G600 half stack, kinda old. I'll turn it on and start playing it will work fine for awhile. But then it will lose most all volume and gain. If you can solder

Crate V16 1X12 Palomino loses power, guitarist robbed of fame I was playing a club gig the other night with my 2-year-old Crate V16 Palomino 1X12. Had the Gain cranked to 5 o'clock, the Level cranked ...

I have a Crate GTX212W Guitar Amplifier. There is an effects unit in the amp which almost looks like it was added as an after thought. This unit causes a buzz that gets very annoying and can sometimes

no sound unless a plug is partially inserted into the effects loop jack. The switch that is a part of the effects loop jack is making poor contact. Open the unit and ALSO check the soldering of the ...

My crate FW120HS has suddenly started giving me loads of reverb, and i have no idea why. Iv not changed any effects or my set up. Its just suddenly happened. Any Ideas? This has a digital reverb unit.

open up buttom Most of these have screws on the bottom... OFTEN they are "hidden" under labels or the rubber feet. For plastic cases often there are snap tabs as well.

crate flexwave 120 tuner and all effects stoped working Often the tuner and effects operate off of a 5 volt power supply and if this part of the main supply fails, the tuner and effects cease ...

buzz across all channels in crate rfx120 Silent when guitar not plugged in, but when guitar plugged in there is a buzz/hiss consistant across all three channels of the amp I also have this issue. Same

gate when a plug is inserted. Inserting a plug (lifting the ground at the input jack) but the voltage falls after a short time causing the output to the PA to shut off.Replaced Q24, D20 is OK, R58 and