auto adjust stops and says "failed". The user's guide say if you get this to: "Press {Enter #} to return to ?Maintenance?, and then repeat the steps from B." and retry the auto adjust. I did this many
...Enter to Auto adjust. If after completing the procedure the error persists, please contact your service representative for support. I'm told this works as well... On the main board put dip switch ...
...auto select in the printer menu you need to select the enter key and then the "aito select" should then have an asterik next to it, meaning that the "auto select" is now the default. ...
Question about Aficio 350e Printer
auto detect incoming fax. Can't be done..this fax can only operate on a dedicated line, and it picks up right away. Sorry. ENTER YELLOW KEY THEN 107 THEN KEY C UNTILL SCREEN OPENS GO TO FAX RAM CHANGE
...enter anadmin email address then theres a box that says auto specify sender name select that. That setting can only be changed from the unit itself and not from the Remote Web Interface!! That sucks! ...
...enter the same paper tray settings and set the trays by size but more important is to set the compute settings Check under printer properties that the configuration is correct as far as paper size is ...
Question about Aficio CL3500N Laser Printer
...Enter to Auto adjust. If after completing the procedure the error persists, please contact your service representative for support. icalled the comapny for you and this is what they said for your ...
Question about Aficio CL3500N Laser Printer
...Scroll to Color Regist Auto Adjust and then press Enter to Auto adjust. But you may have to do this manully adjust all till get right, Sorry cant help you any more than this. All the best ...
- To specify an IP address, choose Specify, and then enter the address you want to use. To have DHCP automatically assign an IP address, choose Auto-Obtain (DHCP). - Exit out of the User Tools screen
THIS CASE INPUT A "1" AND PRESS AUTO IMAGE DENSITY KEY TO CONFIRM AND ENTER THE "1" 5. To leave SP mode, turn off DPS101-2. NOTE: To cancel an already entered SP mode, press the Auto Image Density key
Usually answered in minutes!
629 Questions
382 Questions
267 Questions
215 Questions
218 Questions