...AUDIO 500/1 amp running a JL 10w7 speaker. I am running 4 gauge from battery to fuse box and 8 gauge wire from fuse box to amp. After about 10-25min. of playing the bass loud I blow the 80amp fuse at ...
Jl Audio 500/1 Car Audio we have all the wires hooked up right.... I even tested the wires with another amp and that amp worked. I was just wondering if their are any fuses in the jl audio that might ...
...fuse I got this jl audio 1000/1 on one 13 inch w7 and it worked fine for the first day but now every time I turn the radio up it blows the in line fuse under the hood do anybody got any suggetions. ...
Question about 300/4 Car Audio Amplifier
Audio 300/4 power amp is not working as the green light slowly blinks off and on. Help! Check your fuse at the battery. While AGU glass fuses "look" good, when you read the voltage AFTER the fuse, you
cant find out where the fuse is in the amp. I have a 500/1 Amp and am trying to find out where the fuse is in the amp and can't find it Hello willflo, All of the information that I can find on the JL ...
Question about 500/1 Car Audio Amplifier
the jl audio 500/1 D is cutting on and off and was wondering maybe its just one of the fuses but cant find a diagram to show where the fuses are located in the amp? The Amp Has No Fuses But Best Thing
Question about 1000/1 Car Audio Amplifier
hey i just bought a jl audio 1000/1 v2 amp and was wondering what size fuse to run near battery currently have a 700 watt amplifier with a 60 amp fuse near battery 60 is fine but 40 is standard.
audio slash 500/1 series amp, and it keeps blowing the fuse. am i using the right one? which one should i be using? if its the fuse in the fuse link then you should be using the a 50A fuse thats if on
I blew the fuse inside the fuse block (60A). I replaced it so now I know I have power getting to the amp. I checked it with a meter and I show 12 volts passing throught the fuse block. I can not get ...
I have a jx jl 500/l, amp will not power down unless underhood fuse is removed check your fuse on the battery and check the fuse on the amp or it might b loose connection of power line and the remote ...
Usually answered in minutes!
196 Questions
131 Questions
85 Questions
67 Questions
48 Questions