Questions & Answers for: arrow stapler working

I doing wrong? I am sure it is operator error. No it is not operator error. This is the worst stapler made. I had one, it did the same thing, I brought it back and bought an arrow stapler, works great

...frame I am working on. You MAY need to lube the stapler. Use ONLY staples labelled for use in this stapler. Also check if there might be a smashed staple blocking the driver from doing a full

...Arrow stapler is over 20 years old. Still works great. Sometimes I slide in the wrong size staples by mistake. The process above usually works. Good luck! Remove the front plate that is held in place ...

...Arrow JT27 Stapler gun? I was having the problems everyone listed... with the staples loading  & firing... I guess the instructions are lousy .. should be ON THE PACKAGE to make it clear.. ...

WHERE do I open it to refill it?? Located on the end opposite of where the staples come out, there is a spring loaded cap. Push it in toward the base of the stapler and slightly down to release the ...

...Arrow P22. Place a piece of wood (rod) about a quarter of an inch thick between the arms of the stapler just behind where the stapler is ejected and press down a couple of times until the jammed ...

...Arrow JT27 manual stapler? Hello, there. No, 506 staples will not work in the JT27 stapler. This staple gun takes JT21 staples in 1/4-inch, 5/16-inch and 3/8-inch. Did you have any more questions ...

...stapler. Will the ARROW 405 staples work ? thats the picture of the manual staple gun and the picture of type of staples you want on the staple box confirms you can use the staples in that sears ...

Arrow ET2025 electric stapler + nailer. Manual calls for T50 staples. These do not load into stapler magazine. T50 flat head staples are too wide to fit. Any recommendations? Need flat head staples ...

...STAPLER take ARROW staples? Can the STANLEY 300 electric stapler/nailer use ARROW STAPLES? No, the TRE300 will require a wide crown staple. The staples that will work with the TRE300 are the TRC600 ...