Questions & Answers for: Dodge ares

Question about 2001 Intrepid

Seensor oxigeno not conectted

seensor oxigeno not conectted There are four of these, located on the exhaust manifolds, two on each side. Check the wires and plugs to make sure they are plugged in, and that the wires are not melted

Question about 2003 Grand Caravan AWD

1 Answer

Are the front spring ( coil ), raihgt and left the

are the front spring ( coil ), raihgt and left the same, or are diferent, which are de part number each one ?, I have grand caravan 2,002 engine 3,3? This vehicle has struts under the front of it. The

Question about 2001 Neon

2 Answers

Fog lamps turn on and off when headlights are on.

Fog lamps turn on and off when headlights are on. Something lose or broken inside the headlight switch makes the fog lamps turn on and off only when the headlights are on. Is there any way to fix the ...

Question about 1997 Dakota

1 Answer

What are the lengths of the rear brake lines on a

what are the lengths of the rear brake lines on a 97 Dakota and what are the sizes of the fittings? they are 9 or 10 inch. 9 in. are glued pads. 10 in. are rivited. you will have to pull the drum to ...

Question about 1999 Intrepid

1 Answer

My 1999 dodge intrepid is stuck in low gear code

my 1999 dodge intrepid is stuck in low gear code p1768 is what i am looking for Dodge:Relay always off (relays are stuck open) Dodge:Relay always off (relays are stuck open) Dodge:Relay always off ...

Question about 1995 Dakota

1 Answer

Where are the freeze plugs located on a 1995

where are the freeze plugs located on a 1995 dakota 5.2L? There are several. They are located on both sides of the engine block, on the rear of the engine block between the engine and transmission, ...

Question about 1999 Caravan

1 Answer

What are obd codes 41&42

what are obd codes 41&42 what are obd codes 41&42 41 and 42 are not valid codes for a 1999 Dodge of any model, these are OBD2 systems, the codes are OBD1 (89-95 models). OBD codes are in this ...

Question about 2007 Caliber 2.0

1 Answer

2007 dodge caliber 2 codes are reading p2088 and

2007 dodge caliber 2 codes are reading p2088 and p0010 are these that same?cam shaft position sensor?I read there are 2 sensors and the location of these are what I read you wrote? Sounds like your ...

Question about 2002 Caravan

1 Answer

Turn signals and hazards are not functioning

Turn signals and hazards are not functioning Indicator lights on dash indicate that the turn signals/hazard lights are working, but they are not functioning. Check the bulbs the dash lights will still

Question about 2002 Caravan

1 Answer

My dash lights not working on my dodge magnum but all the other lights work tryna figure out what fuse it is

My dash lights not working on my dodge magnum but all the other lights work tryna figure out what fuse it is Are you sure tail lights are working. These are fused together, so you know by the dash ...