Questions & Answers for: Kenmore HE2 how to take apart my washer

...washer and need help taking it apart this video is an early christmas present. I was so impressed with it that when I saw all these people needing help, I wanted to tell them about it. If you look at ...

...washer and need help taking it apart this video is an early christmas present. I was so impressed with it that when I saw all these people needing help, I wanted to tell them about it. If you look at ...

I have a kenmore HE2plus washer and recently moved it into my apartment. The managers took away their washer from my apartment and I saw when they left a hooked pipe on the end of their washer. My ...

...there is a spring on the front of the gasket the back spring the washer needs to be taken ...

wash drum won't rotate, how do you take apart? taking apart this machine is very time consuming, the entire tub assembly has to be removed from the washer cabinet.Does the drum turn by hand?

...washer leaves oil spots on my clothes. How do I fix it? The only place where oil can enter the wash would be if the bearing seals have failed. It's a major repair, and the entire machine has to be ...

...it. It is very loud. I turned it off and removed the clothes. What is causing it to do that? This is caused by a worn out rear washer tub bearing, the whole washer must be pulled apart to replace

...easy fix I took apart my washer ther should be a belt that almost looks like a belt off a car it probably went off track once you get it apart try spinning the belt you should be able to fix ...

...washer back in I had no power. I took it all apart and made sure there were no loose or cut wires. I still have no power. Check The Door Switch The Washer Does Not Operate If The Door Switch Won't ...

...washer will spin and I can hear the drain motor noise but it will not drain. I've taken everything apart except the hose from the drum and there's no clogs. I manually drain the water and start it ...