Questions & Answers for: Oldsmobile Alero anti theft reset

...anti theft system their is a procedure for resetting this, i cant remember for sure but try turing the key on and off like eight times and take the key out for ten secounds and then try to start

Ad

...Sounds like your anti theft system. You can manually reset it. Turn the key on, and leave it for 10-15 minutes. Try to start after this. If this doesn't work, may be time for a trip to the GM

Ad

Question about 2003 Alero

1 Answer

...ANTI-THEFT DEVICE FOR OLDSMOBILE ALERO Three cycles of ON-OFF: Turn ignition ON, wait for 10 minutes. Turn ignition OFF Turn ignition ON, wait for 10 minutes. Turn ignition OFF Turn ignition ON, wait ...

you can reset the light by leaving the battery cable (negative cable) unhooked for 15 minutes. If you have a factory radio with OEM anti-theft, be sure you know the code before you unhook the battery

...MOST THE LATE MODEL CARS OBD 2 PCM CONTROL FROM 1996 - 2011 WHEN EVER YOU REPLACE THE PCM BEST FOR DEALERSHIP TO FIX BECAUSE THE PCM - CRANKSHAFT SENSOR - ANTI THEFT SYSTEM HAS TO BE

anti-theft device in my 2003 Alero. Last year it stopped running and would not turn-over. $400 later, Brakemax said they just had to reset the anti-theft device. oK, so then it has run fine until last

Question about 2000 Alero

1 Answer

...to reset factory anti theft anti theft turns off fuel pump relay not spark if you have the 2.4l they had ALOT of problem with the spark module failure the one under the cover. replace the entire ...

...anti-theft on a 2000 alero reset anti-theft How to reset anti-theft on a 2000 alero - Fixya www.fixya.com/cars/t25627937-reset_anti_theft_2000_alero Apr 4, 2015 - how to reset anti-theft on a 2000 ...

...anti theft' needs to recognize the new cluster. The system will need to be reset. It's been a few years but if I remember correctly you need to turn the key on, then off 3 times, then turn the key to ...

anti-theft system in your vehicle can not be by-passed by using a resistor . The Passlockā„¢ System is provided in order to prevent vehicle theft if the ignition lock cylinder is forced to rotate or the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...