Questions & Answers for: Pontiac anti rattle spring

Question about 1998 Sunfire

2 Answers

anti-clunk spring (That's the real name) Check the manual carefully. Without knowing anything other than a 'spring', it's almost impossible to give an accurate answer. Real big--compared to what? What

Ad

Question about 1999 Grand Am GT

1 Answer

...rattle, click, or give any indication it was running loose. Take off each valve cover separately and while the engine runs put your thumb on the valve spring. If you can make it misfire by pushing ...

Ad

Question about 2001 Grand Am SE

2 Answers

...btrake pad anti rattle springs replaced or checked for condition, the brakes can make this noise if the springs loose there tension. have u found the answer out because mine is doing the same

...rattle near the front left tire area while driving. Could this be a strut or spring problem? Can hear it most when coasting on a bumpy area. It could be a worn or broken sway bar link or sway bar ...

Question about 2004 Sunfire

1 Answer

rattle in front on 2004 grand prix rattle in front as I go over bumps. check front suspension springs as a small piece may have broken off it. hope this helps

...area The thumping Would likely be warped rotors causing the pads to rock in the carrier, (Assuming the anti rattle clips were installed at the time brakes were replaced?) Turn or replace rear ...

...sprayed them with brake cleaner, (ABS safe). I dont know if this relates but i didnt experience this with my old gear. Did you install the brake pad spring anti rattle clips? Many leave this

...rattle more.... Does not effect performance ignore the so called bar room experts and ask a local mechanic to have a look for you ,could be anything from anti roll bar bushes to a marble in the ...

clutch will engage but wont go into gear and there is a rattling noise It is probably a bad clutch disc. There are springs in the disc that can loosen up or break, and the clutch disc will stop ...

my 2005 pontiac grand prix is making a rattling sound at 1500-2000 rpm under a load. Ignition system is not correctly timed. Set Base Time. ..If correct advance 5 degree see if this improves.... ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...