Questions & Answers for: Fisher and Paykel anti jam

Question about Fisher and Paykel Washing Machines

1 Answer

...underneath. u will see 2 the front right a red or black fan on the pump,turn this clockwise and anti clockwise it should unjam it if it jammed. make sure power is turned off when u r doing this

Ad

Question about 24 in. DD-602 Built-in Dishwasher

1 Answer

red light f2 Is the rotor jammed? Free jammed rotor, check for damage to rotor and rotor housing. Is the stator wiring from controller OK? Check stator windings for correct resistance Is the rotor ...

Ad

Question about 24 in. DD603MFC Built-In Dishwasher

1 Answer

ERROR F5 F5 LED's o o @ o @ Lid actuator is jammed either up or down. Primary Action - Check for dishes preventing lid from closing. - Check lid actuators in diagnostics. - Check yokes are moving ...

Question about (IWL12)

1 Answer

...right of the machine you will see a black or red fan, that is the pump. turn the fan clockwise then anti clockwise and hopefully that will loosen up what is jamming the pump. put the machine back on ...

Question about GWL11 Top Load Washer

1 Answer

Will not add water to start cycle. Tried unplugging it, then took apart inlet valves. Now what? I dont think its your solenoid, very likely your electronics board.  Check your belts, maybe belt ...

Question about GWL11 Top Load Washer

1 Answer

Fisher Paykel washer stuck on rinse cycle. Wont advance. Pump fine. Could it be the diverter valve. Took it apart and it was clean, no broken parts. Check your belts, maybe belt slipping or pump ...

Question about GWL11 Top Load Washer

1 Answer

not pumping out water on rinse cycle The washing machine fills and washes on regular wash cycle but stops on the rinse cycle and does not pump out water. The motor also makes a whirring noise during ...

Dishwasher DD605 f2problem motor has been replaced Dd605 Hi.F2 means "Motor rotation not sensed". If the motor has already been replaced , then either the hall sensor that detects the rotation is not ...

Question about GWL11 Top Load Washer

1 Answer

Error code 43 came up on the screen. What does this mean? This  error indicates the load is out of balance. Try moving the load around otr taking some of it out to clear the error. If it persists

fisher & paykel smart drive agitator placement Have replacement agitator. Have unscrewed wingnut on old one, but it seems to be stuck. It won't lift out. Now what do I do? Use some ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machine Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...