Questions & Answers for: amplifier doesnt work

Question about ZX-7180 Car Audio Amplifier

1 Answer

...protection light will not go off disconect ur battary and wait 2 min. if that doesnt work then 1 wire could be grounding out..check wires for bad conection if that doesnt work then its probaly ...

Ad

Question about BMW-486 Car Audio Amplifier

1 Answer

...i have a bmw 486 and its blown but it was tested and was powering 2 15s and i tried to power it but it doesnt work it turns on but doesnt play wtf?!?!? check the rca cables your using they may be ...

Ad

Question about XM-1002HX Car Audio Amplifier

1 Answer

...doesnt work somewhy,i connected everythin properly,and it stil doesnt work Check your ground it may not be good enough also check to make sure your remote wire is reading 12 volts with the key on. If ...

Question about D52W19 52" Rear Projection Television

1 Answer

...doesnt work, the TV speakers dont work, my surround sound speakers dont work. I tried it with my DVD player, my Xbox etc. and nothing. I messed with all the settings and everything is fine that I can ...

Question about DHC1400.05 Amplifier Car Audio Amplifier

1 Answer

...when its cold out the amp doesnt work properly. It will send weird singnals to the subs i know the subs I have when it gets around 20 degrees it takes a bit to warm up. after that it jams as

Question about Thunder 81000D Car Audio Amplifier

1 Answer

...doesnt work I have my amplifier hooked up and the light turns on and it should be working, but when the volumes up, i cant see the subs moving, i feel it and there is a slight vibration, hardley ...

Question about CE2000 Amplifier

1 Answer

...doesnt work the fan works only when the temperature goes up beyond a limit.the circuit gets triggered only after this point. check the voltage to this drive circuit and the trigger. heat the ...

Question about JXP680 Car Audio Amplifier

1 Answer

...owners manual for jensen jxp680 amplifier http://a248.e.akamai.net/pix.crutchfield.com/manuals/110/110jxp680.pdf if it doesnt work by clicking it, right click and save target as hope this ...

Question about 250 Watt PA Amplifier Amplifier

1 Answer

...doesnt work o the amplifier It's possible this has two fuses. Check to see if either is blown and reset/replace. If not, then the "channel" (side) that won't work has been damaged and will be ...

i have a 1200watt sony xplod amplifier and my friend switched the 2 ohm to 1 ohm switch before i turned the power off to my stereo and now my amp doesnt work how can i fix it Worth fixing.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Car Audio & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...