Questions & Answers for: Fusion my amplifier

10 inch fusion amp how do you wire a 10" 600w fusion amp first of all your question is unclear, do you need speaker advise or amplifier advise

possible conditions that would result in the amp not working, but the status LED on: 1) Fuse on the amplifier blown - replace fuse with correct type and amperage. 2) Amplifier too hot - move amplifier

...battery. It should be a fused connection rated to about 15% higher than the fuse installed in your amplifier. Negative or '-' or Ground. This wire should be just as thick as the 'Batt + or B+ or ...

i have a fusion EN-AM3002 300 watt amplifier and at times especially when the car is running the red light will come on and i get no power from the amp. other times if i have the car off but radio on,

i mixed up connections by connecting the positive pole of car battery with the negative pole of the amplifier and the negative pole of car battery with positive pole of amplifier and the amplifier did

can i connect a subwoffer and 2 6 inch 3way speakers to one 2 channel amplifier?. No, it wouldn't sound the same, because your subwoofer speaker, works and sound's differently from your 3way speakers,

How easy is it to damage this amplifier ? My amp was set up on a shelf like in the back of my PT Cruzzer and the shelf busted and the amp collasped with the shelf. Then I unplugged some wires to fix ...

I thank my amp it blown, can it be fixed? no not really it can be fixed but its a 50/50 chance not to mention its cheaper to get a new amp

...head unit in the dash...when you turn the radio on the remote lead becomes hot(+12V) to turn the amplifier on...without the remote lead the amplifier would stay on all the time and would then

i have power in the amp but its not powering my subs? they move when music is on but nothing as what they should? need more input here. what subs r u driving. have you checked the input gain controls?