Questions & Answers for: amp throttle linkage Motorcycles

...throttle linkage missing I have a Poulan Lawntractor Model # 271470 with BRIGGS & STRATTON 13.5HP 28R707 and Walbro LMT Carb, Had to overhaul Carb. During reinstall can't get throttle linkage to ...

...amp; then released. Vehicle off, in park obviously. It may be a seized throttle valve linkage, just apply penetrating lube like WD-40, and try getting it to move farther & more free by hand, as ...

...amp; Stratton 135212/0129 engine on a Homelite HL2500 generator. I have no idea where to start with the various settings. After monkeying with it for 2 hours I managed to get it to idle consistently. ...

1990 chevy vandura 3500 not shutting off and have a high rev that will not kick down sounds like throttle sticking check cable to throttle linkage & linkage

...IAC valve (needed new one) & throttle cable is low as it can go. Any suggestions? The throttle linkage may be sticking. May have a vacuum leak at the intake manifold or with the hose

...Maybe they're close . . . which linkage are you trying to find or were to go I'm looking for the diagram of a 1999 Briggs & Stratton 17 horsepower twin 2 the throttle linkage and ...

...slow. linkage seems good cleaned & lubed everything but no luck.any help would be great Check your linkage at the top of the carb,the throttle link couldve came loose at the throttle

...body replaced & Throttle Body cleaned 1 year ago. Worked great for a year and now same symptoms. sounds like the linkage is sticking if it is cable throttle. if not then throttle biody ...

...amp; linkage on carb / throttle. One of those springs and/or linkage pieces is largely responsible for idling UP the engine so that it will be able to operate the welder & generator.  If it ...

...throttle body. Check the outermost cable connected to linkage. That is cruise control cable. Follow cable to cruise control box. usually mounted under drivers side fender. You may have to remove ...