Hi, I have a 1987 nissan pulsar that dumps large amounts of gas into the engine. Husband suspects throttle body may need to be replaced. We need help!Car will not start without shutting fuel off to ...
High idle speed- Nissan N16 Pulsar/ Almera My 2001 N16 1.8 litre Nissan started idling high a few days ago. I have checked the throttle body, throttle position sensor, throttle closed switch, and ...
revs in all gears no drive at all Automatic gearbox revs in all gears no drive at all, Selector is moving and gear lever but no movement. the dipstick is reading full MAKE SURE MANUAL LINKAGE IS ...
engine is not getting fuel. fuel pump is engine is not getting fuel. fuel pump is operating, i get fuel right up to the throttle body, but the car won't start. if i add fuel manually into the throttle
my 1990 nissan pulsar 1600 wont change into fourth sometimes when driving could be bad throwout bearing or cluctch linkage needs to be adjusted.
amp; off to charge the system pressure as required. The Idle up system typically uses an IDLE UP SOLENOID which is usually mounted directly on the throttle linkage at the Carby or Throttle body itself
83 nissan pulsar NX i have a 83 nissan pulsar NX 1.6l having problems with idling and jerking when stepping on gas pedal after that it stalls...help will be appearciated..thanks... Check he mas air ...
...Of Print books web site:
I have a 89 nissan pulsar with a 1.6 sohc engine. the engine sat in a field for 3 years so i rebuilt it and now the problem is that if i pour gas into the throttle body it starts and runs till that ...
car runs smoothly one day, then out of the blue it wont go past 2thousand revs or wont even start. If left for a few hours it will start fine. Mechanics have changed the air flow meter 3 times and ...
Usually answered in minutes!
331 Questions
95 Questions
65 Questions
52 Questions
21 Questions