...Linkage Cleaner or equivalent, spray the throttle body plate and bore. Using a suitable (nylon) brush, clean the edges of the throttle plate and the mating surface of the throttle bore to remove all ...
Throttle linkage is in normal idle position. replace throttle body gasket. first check to see if carbon has built up around the throttle valves in throttle body if so remove and clean it with throttle
revving high - throttle stuck? the car is revving high - no need to put foot on gas - sounds like it is going to blow up - replaced the TPS , took apart the linkages and cleaned but still the problem ...
car keeps idleing very high i have to slam it in park and turn off car check for stuck throttle linkages.
...linkage between throttle and transmission linkage, it has plastic bushings that hold it in place, they will get brittle with time and break, allowing linkage to come off or be out of adjustment. Have ...
Question about 1995 Sable
throttle body.Here is a diagram showing where the TPS is located on this vehicle.Hope this helps... follow your breather to the throatl find the linkage where cables go to your ecelarator just to
throttle cable is broken or disconnected, but can't find anything online. Does this car have a traditional throttle cable? Car will still drive slowly if foot is taken off brake and everything
how to tighten the shifter linkage on 93 grand maquise Replace worn shift linkage bushings & possibly Braze (weld) in some worn holes in linkage
Question about 1993 Grand Marquis
...fool around with air mixture. Some throttle cables use threaded linkage and length of rod is adjustment for rpm. Others use a stop screw or hex head to move the throttle lever away from the
Question about 1993 Grand Marquis
...linkage position at the throttle body....(unless Mercury/Ford is doing something unique). Most times it's mounted on the throttle body housing itself; could be underneath, on top, side, wherever. ...
Usually answered in minutes!
1,305 Questions
689 Questions
627 Questions
646 Questions
630 Questions