Questions & Answers for: BMW amp throttle linkage

...linkage to the throttle, have some one start it, then rev it and see what unbinds, or does not go back exactly. Must be mechanical and not electronic. For a petrol vehicle, this is often how ...

bmw 320i dosn't change down to first pulls away in second check the linkage by the throttle check for vaccum leaks

automatic choke is stuck on my bmw my revs are going up to 3000 and i was told that my choke was stuck on how can i solve this the 318 is fuel injected and has no automatic choke,it does have a cold ...

...way to the floor. Any suggestions? just have the linkage checked , busted cable sounds like, then look for reasons why as well, ex. why did it break, worn , frayed, something froze up on throttle ...

...throttle, it seems to be mis-shifting i.e. jumping.  When accelerating in forward everything seems to be fine.  Also, the engine seems to get hot quickly, tho the temp gauge reads fine, and ...

...throttle control to improve drivability and vehicle emissions, as well as many convenience features like electronic cruise control, traction control & stability control. BMW first implemented ...

why ? EML  means drive by wire throttle control system.Its a drive by wire not a mechanical linkage, A fault has been detected,in the throttle accelerator pedal position ot the TAC valve assemble

...throttle. "EDK" throttles use a computer controlled stepper motor rather than a purely mechanical linkage (usu. metal cable attached directly to the accelerator pedal) to control the opening and ...

...amp; 119. These all relate to the throttle assembly, which on your car is an MDK, motor driven throttle.The first thing I would do is make sure that the cable is reinstalled correctly and secure ...

...there is a screw that touches it , turn it in slightly ! if no linkage and it lifts from the carb top then there will a tickover screw in the side of throttle slide , turn it in to get tickover !