Questions & Answers for: american standard cadet 3 toilet

...about 15 minutes level in bowl brops to 2". No leaks appear anywhere. This is the second Cadet 3 we have installed in our home this year. First was perfect You have a blockage in your drainage

cadet 3 and every twenty minutes it will run for about three seconds and i know it isn't supposed to do that EITHER THE FLAPPER IS NOT PROPERLY ADJUSTED OR YOU WILL NEED A NEW FLAPPER. WATER IS SLOWLY

american standard brand model CADET 3 one piece unit and recently 1 month ago , after flushing the toilet the water fills the up the water tank but there is continuous leaking(dribbling) of water into

...Cadet 3 toilet worked fine for a year. A plumber fixed a leak at the intake line. Since he left the bowl does not fill with enough water. This causes water to splash when I flush. The flapper has a ...

American Standard cadet 3 that was just installed. After flushing, the water fills into the bowl. However, after several minutes, the water in the bowl is nearly gone. The flapper appears to be seated

...American Standard Cadet 3 that was just installed. After flushing, the water fills into the bowl. However, after several minutes, the water in the bowl slowly drains away and is nearly gone. The ...

...American Standard Cadet 3 toilet with a 3" flush valve. The tank model 4021 Hi keithn60... I had the same problem one time with my toilet tank, the answer is to put some silicone on the seal ...

american standard caded 3 leaking water from tank into toilet and occasionally running every 5 minutes. is this a flapper problem (it seems well seated) or could it be leaking elswhere? It could be a ...

...american standard slow close toilet seat Loose. Needs to be tightened Check the chain the goes between the handle and the flapper. It should not be taught. If it is it will not permit the flapper to ...

...American standard cadet 3 toilet? Help! I have an American Standard Cadet 3 #4021N 4.8 LPF 1.28 GPF there is a bar code # 7930956475. Have replaced all the seals. I've also replaced the lapper at ...