Questions & Answers for: Volkswagen Jetta alternator belt

Question about 1998 Jetta

1 Answer

...alternator belt on a 1988 VW cabriolet. In order to install the alternator belt i have to remove the starter belt, which is on the outside pully. The alternator belt is on the inside pully and cannot ...

Ad

Question about 2002 Jetta TDI

1 Answer

...number;; if the wrong belt is fitted as you say then indeed it will pull the bearings in the alternator and run them out;as for the belt run this is a straight forward.let me know the out ...

Ad

...alternator belt or the alternator is going bad. The squealing sound was probably the alternator belt. the alternator belt might need to get tightened or replaced or you may need a new alternator. The ...

...Alternator belt routing ? all except VR6, with power steering, no A/C Disconnect the negative battery cable. Disconnect the wiring from the alternator. If necessary, mark the wires with tape or other ...

alternator belt has not come off or broke,otherwise your alternator is not charging and needs to be checked by an auto electrician sounds like belt broke or alternator failed charge battery and see if

...alternator belt you need 3 lets of hands. with the alternator tigtening bracket bolt loosened off, put the handle part of a hammer between the alternator and the engine ang use this as a lever to ...

...belt, or bad alternator among a few other things. If your belt is hanging either the belt broke or more commonly, the alternator puller broke off the shaft. It happens all the time with the ...

Question about 1990 Jetta

1 Answer

alternator belt on my1990 vw diesel jetta as the alternator IS the adjuster for the tension of the belt,it is a simple task of undoing the alternator bolts/nuts and pushing it inwards to fit belt,then

Question about 1990 Jetta

2 Answers

...ALTERNATOR DRIVE BELT.IF ALL IS GOOD CHECK ALTERNATOR VOLTS OUT PUT AT BATTERY WHILE ENGINE RUNNING VOLTS SHOULD BE 13.5 - 14.5 VOLTS. IF NOT ALTERNATOR IS DEFECTIVE. could be worn contact brushes in ...

...belt off your alternator, taking care not to also slip it off the any other pulley wheels. Use a wrench to remove the nut that secures two wires in place on the back of the alternator. Loosen the two ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...