Questions & Answers for: Hyundai Sonata alternator belt

Question about Motor 1998 Sonata

1 Answer

belt from the alternator, (just the alternator). Disconnect the wires. Remove the bolts then the alternator. Put new alternator in place using old bolts. Replace wires (may only be one wire, depending

Ad

...Alternator Belt installation cause a timing belt problem? My wife's 2001 sonata (96,000km) broke its alternator belt while driving to work. I picked up the car and drove it to the nearest garage (not ...

Ad

Question about 2000 Sonata

1 Answer

alternator belt One morning on my way to work: car started great so i drove from the parking lot. At about 200 meters the car engine just died and i was lucky to be at a stop sign. I tried to start it

Question about 2000 Sonata

3 Answers

...belt Alternator wiring harness connectors Alternator. It may be necessary to raise the radiator Fig. Exploded view of the alternator-XG 300 and XG 350 Removal & Installation Remove or disconnect ...

...belt Alternator wiring harness connectors Alternator. It may be necessary to raise the radiator Fig. Exploded view of the alternator-XG 300 Removal & Installation Before servicing the vehicle, ...

...alternator belt shreading and having to get a new battery every 3-5 months after the original alternator has been replaced. ALTERNATOR DRIVE BELT TENSION COULD BE LOOSE WHERE BELT IS SLIPPING CAUSING ...

Question about 2006 Sonata

1 Answer

ALTERNATOR DRIVE BELT COULD BE SLIPPING NEED ADJUSTMENT.IF BELT TENSION OKAY CHECK ALTERNATOR OUT PUT AT BATTERY.SHOULD BE 13.5 TO 14.5 VOLTS.IF NOT ALTERNATOR FAULTY ALSO CHECK ALTERNATOR FUSE.DUE TO

...belt or alternator belt, or the fan belt. but it squeaks and none of the fans turn on can you help. thank you could be the clutch fan if your fan doesn't come on. also the belts could be to tight or ...

...alternator pulley was gone. Somehow the belt stayed on. What would cause the pully to just shear off? If the bolt was lose and caused the pulley to bend down the power behind the belt was too great ...

...belt to the alternator. Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys. Slowly release the drive belt tensioner Install the engine splash shield. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...