Questions & Answers for: Harley Davidson FXDWG Dyna Wide Glide air fuel mixture

Question about 2002 FXDWG Dyna Wide Glide

1 Answer

...air filter assembly there is one other thing that I've seen cause this problem. Your bike has two vacuum operated devices on it. One is the VOES switch and the other is the fuel petcock. The VOES ...

Ad

Question about 2003 FXDWG Dyna Wide Glide

1 Answer

...fuel/air mixture is exhausted into the exhaust pipes. The next time the engine fires on that cylinder, it ignites this unburned mixture causing the loud pop. It sounds like your problem is ignition ...

Ad

Question about 2003 FXDWG Dyna Wide Glide

2 Answers

...fuel and air that the engine runs on when the engine is cold. The mixture is very rich as well. But when you crack the throttle the least bit, the air that the engine draws in comes in through the ...

...air-fuel mixture skrew you may turn it in as well, if not there is a video below on how to gain access, make sure you start with clean or new spark plugs. Gently turn the air-fuel mixture skrew ...

...air-fuel mixture skrew you may turn it in as well, if not there is a video below on how to gain access, make sure you start with clean or new spark plugs. Gently turn the air-fuel mixture skrew ...

...fuel/air mixture screw. Do not forget, there are 2 other adjustments... idle and an adjustment to the diafram when you blip the throttle. I can give instruction on how to adjust, but you should look ...

...air-fuel mixture in the carburetor in order for the engine to run smoothly and at peak performance. If you are running multi carburetors you need to sync them first and make sure your air cleaner ...

...air/fuel mixture in the cylinder has been ignited by the spark plug and the smooth burning is interrupted by the unburned mixture in the combustion chamber exploding before the flame front can reach ...

Question about 2001 FXDWG Dyna Wide Glide

0 Answer

...air fuel mixture screw to lean, idle set to low, low speed jet clogged, loose and or corroded battery terminals, low battery voltage, and my personal favorite grumpy ignition control module and or ...

Air-fuel mixture screws not properly adjusted. 4. Pilot jet clogged. 5. Pilot jets too small. 6. Clogged air filter. 7. Faulty choke. 8. Multi carburetors not in sync. 9. Carburetor float needle valve

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...