Questions & Answers for: Suzuki air fuel mixture

...fuel|air screw be set at.it must be in the carb. It seems the carb/s flooding with fuel and thus it dies, try to reset the float pin and get the correct level of the fuel in the float chamber. ...

Ad

Question about 1993 Samurai

2 Answers

...air fuel mixture on a 87 suzuki samuria On any carburator,one screw is for the idle speed, the other the air/fuel mix.Start the engine and let it get plenty warmed up. Adjust the idle screw to make ...

Ad

Question about 1991 GSF 400 Bandit

1 Answer

fuel-air mixture at idle speed and is a trial and error thing. Pilot and Main jets regulate cruising and acceleration mixtures and ranges according to rider style and riding and climate conditions. If

...11k. The motor oil shouldn't have anything to do with the air/fuel mixture. What makes you think it's running rich? Your bike is fuel injected, and should self-regulate the air/fuel

Question about 2005 Boulevard M50

0 Answer

air-fuel mixture skrew you may turn it as well, if not there is a video below on how to gain access, make sure you start with clean or new spark plugs. Gently turn the air-fuel mixture skrew clockwise

...fuel air mix, you must be gettng too much air for fuel going in, you need to find the mixture screw on carb, my thought are to increase the fuel, but it could be the opposite, play around either way, ...

Question about 1996 GSF 600 S Bandit

0 Answer

air fuel mixture skrew you may turn it as well, if not there is a video below on how to gain access, make sure you start with clean or new spark plugs. Gently turn the air fuel mixture skrew clockwise

Question about 1996 GSF 600 S Bandit

0 Answer

...air-fuel mixture adjustment Hi, Ed it should be noted that the "AIR FUEL" mixture screw adjustment "ONLY" manages your idle and has no effect on any other circuit also any intake leaks must be ...

Question about 1996 GSX 750 F (Katana)

1 Answer

...air/fuel screws. After rebuilding the carbs what and how many turns on air/fuel mixture screw? Mentioned here. the standard is normally screw in lightly and back out 1 1/2 turns. Carb air/fuel mix ...

Question about 1996 GSX 750 F (Katana)

1 Answer

...air/fuel screw on a suzuki vs 800 intruder The air/fuel mixture screw on a Suzuki VS800 Intruder is typically located on the carburetor. To adjust the air/fuel mixture, you'll need to locate the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...