...agitator by removing bolt in center but canot get it apart to replace these. do you have diagram on how or if it comes apart or how to get these out to replace them.thanks clueless! whirlpool model# ...
...There is a slot for a flat screwdriver on the top side. Remove the 7/16 bolt. Pull the agitator apart. Replace the agitator dogs inside the top part. Parts about $5.00.at any appliance parts
...apart it is a model whdre526e1ww If the agitator does not work, then depending on make, it could be your clutch or transmission or belt tension. Agitators are pushed on type(To remove pull up), but ...
...shaft. I can hear the screw inside the agitator assembly but I don't know how to take the agitator assembly apart. should be able to just lift agitator off the shaft check threads on agitator and ...
Question about Ultimate Care II LSQ9549L Top Load Washer
...apart if you put the agitator on the floor, put your feet on the bottom and pull straight up on the top. I have tried but mine won't come apart. Is there something to line up or press while I 'm ...
Question about WBSR3140GWW Top Load Washer
agitator apart to get to the screw on a GE mod WBSR3140DAWW washer Agitator keeps falling off during spin cycle. screw is there, can't get to it without taking it apart. Don't know how
Question about 98702 Stacked Washer/Dryer
...apart in order to do this? agitator repair 417.97812700--agitator is one piece and I can't get it out of the washer in order to put the dogs in. Do I have to take the w/d apart in order to do ...
Question about 98702 Stacked Washer/Dryer
...agitator apart Could be a Major issue! Unless the agitator will unhook from inside the tub. See if the Very Top of the agitator unscrews. If it does then the agitator should come up. The motor is ...
Question about 98702 Stacked Washer/Dryer
...apart to access the agitator dogs. I read that it just pulls apart, but it is not coming apart. it looks like there is a white plastic washer being held down by some plastic clips that prevents the ...
...agitator apart Can not take it apart but to remove it reach with both hands into the machine grip the agitator firmly at the bottom by getting both hands fingers under the bottom rim of the agitator. ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions