Questions & Answers for: af error

Question about MFC-210C All-In-One Printer

1 Answer

...error AF HI, I had an error 46 ,and i opened up the ink absorbent and cleaned the sponge up and assembled it up. now i am getting an error "UNABLE TO INITIATE, A NOICE IS HEARD AND MACHINE ERROR AF". ...

Ad

Question about AI7 Motherboard

1 Answer

a17 wont boot i cannot get my monitor to work on boot coming up with code af ok what board is it #then check the manual for error post code error af if not try another card liek a pci one or agp one

Ad

Question about Cabrio 7.0 Cu. Ft. Super Capacity Plus Electric Dryer

1 Answer

...error message AF druing drying cycle and I've cleaned the lint trap. keep getting error message on our whirlpool dryer cabrio af and I've cleaned the lint trap. check for clog or kink in dryer ...

Question about MFC 9600 All-In-One Laser Printer

1 Answer

machine error af "machine error af" on screen Turned machine on and then off

Question about MFC 9600 All-In-One Laser Printer

1 Answer

...Error 99 is known as Abnormal Mirror operation. Follow the link for help;EOS-1D Mark III/EOS-1Ds Mark III: AF Accuracy Adjustment EOS-1D Mark III/EOS-1Ds Mark III: Abnormal Mirror Operation (Err 99) ...

Question about Bravos 7.0 Cu. Ft. Electric Dryer

1 Answer

AF Error Code My brand new Maytag Bravos electric dryer is showing the AF error code. Clothes will be hot but not dry and the blower doesn't seem to be working. The vent is clear and there is no lint ...

Question about 70-300mm f/4-5.6 Di Zoom Lens for Canon AF Cameras

1 Answer

error 01 tamron lens 70-300 mm af 4-5.6 with canon dslr 450d Error 01 means that communication between camera and lens is faulty. Try to clean lens contacts.

Question about 67062 Dryer

1 Answer

AF error will not go away after cleaning vent and lint filters Hi, Thank you for contacting Fixya.com. AF is an error that will flash if a restricted air flow is sensed by the dryer control. If three ...

Question about 67062 Dryer

1 Answer

...AF code persists. Disconnect power then remove the rear access panel and locate the thermistor on the blower housing. Disconnecting the thermistor and running the dryer will cause E1 to appear on the ...

Question about DCP 130C All-In-One InkJet Printer

1 Answer

...Error AF Printer gives error AF - Was can't INIT, I took some parts apart and now it's machine error AF The flat cable of the scanner wasn't connected properly. Try to straighten the end using your ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66848 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...