Question about 3537 Mechanical Sewing Machine
...necchi 3537 all machines thread the same. TTN tension, take up, needle. Beginning with the spool, guide the thread through the thread guides to the tension assembly. Pull the thread through the ...
Question about 3537 Mechanical Sewing Machine
necchi 511..how do you adjust thread tension on top thread Before the thread goes though the uptake lever, it goes though the tension (a round "knob" with numbers). When threading the machine, lift ...
...tension, but maybe I'm doing that wrong. I also own 2 necchi sewing machines, my mechanical is a 4595,, lower thread tension to test the bobbin tension, remove the bobbin case & bobbin & hold ...
...necchi-535-fa-tension-adjustment-sewing-machine-part-3/ . There are also several sites that have parts for sewing machines but do not list their complete inventory online. To check if they have your ...
Question about 4595 Mechanical Sewing Machine
...tension on a Necchi Lydia 510 sewing machine? New thread, re-stringing both the upper thread and bobbin thread. Tried to "tweek" machine by turning adjustment knobs trying to achieve a good tention ...
...adjustments the bobbin is looping not sewing try a new needle rethread the machine top and bobbin try adjusting the top thread tension make sure the bobbin is inserted into the bobbin case ...
Question about 4595 Mechanical Sewing Machine
adjusting (tightening) the bobbin case tension. If that does not fix the problem, you can probably try purchasing a new bobbin case for your machine as the old one may be broken or worn. adjust bobbin
Question about 4595 Mechanical Sewing Machine
Necchi Omega 6147. How can I adjust the drop-in bobbin to use upholstery thread to sew heavy fabrics or leather? You would need to adjust the tension screw so the tension is looser than usual. However
Question about 4595 Mechanical Sewing Machine
...case to adjust the tension http://www.fixya.com/support/t9472526-necchi_alco_a709_3c_06906_made_in ...
Question about 4595 Mechanical Sewing Machine
...Tension, stitch length and stitch width are all controlled by small dials on the front of the Necchi machine. If your stitch length is set to 0, the sewing machine will not feed the fabric. Incorrect ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions