...pinion angle and have it adjusted all the way). I've taken it to another dealer and their mechanic said he doesn't feel any problem. Any Ideas? I have this sane issue on a 2006 Mustang, I thought it ...
...pinion angle. I bought my car from a guy who changed the tranny upwards of 6 times. i figured that the stock tranny couldn't handle the power but as i checked into it, my pinion angle was wrong. I ...
...pinion angle has not been compromised (I generally set angle at 2 to 4 degrees down, at rest. This prevents excessive "up" position during loading which can cause binding of rear "u" joint.. On ...
Question about 2002 Durango
...its pointing upward b/c thats what the pinon angle is set for that way there is no vibration when driving it. they sell pinion shims to place b/w the leaf spring and the axle to turn it more up or ...
...got some longer and stronger bolts and put a lock nut on the back side of the yoke. Thanks for your help. need to shim the rearend mounts to adjust the pinion angle to compensate for the body
...pinion angle (that seems ok now). Usually if there is a howl on acceleration from the rear it's the big pinion bearing,if the howl is on deceleration it's the small pinion bearing.(the pinion shaft ...
I have a vibration in my 04 ram 3500 that occurs a... I have a vibration in my 04 ram 3500 that occurs at higher speeds around 65 mph. I have balanced the tires and removed the front driveline to see ...
power steering fluid is leaking - on which side of the car is the rack and pinion when sitting in the drivers seat. Hi, Aillathu, The rack and pinion unit fits across from left to right....It is ...
...pinion angle where it needs to be. For this install we went with Rock Krawlers upper and lower, front and rear control arms. The quality on these arms is phenomenal and the adjustable sides feature a ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
