Questions & Answers for: adjusting high beam headlights olds

Question about 2000 Alero

1 Answer

...beam height on a 2000 Alero? I tried turning the two (2) white knurled screws on top of the light assembly but they do nothing but turn freely. There should be 2 more screws on the headlight housing, ...

Ad

Question about 2005 Monte Carlo

1 Answer

...high beam? They are completely out of wack. The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the ...

Ad

...beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well Park your car on a level ground ...

...a fuse or relay I can check or replace today? yes there is but it is probably da bulbs My 99 olds alero. The low beam don't work. Replaced bulb still don't work. High beams work. What else could it ...

...beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well Park your car on a level ground ...

...adjusting the lights, BUT always have the adjustment checked by a reputable shop. Before removing the headlight bulb or disturbing the headlamp in any way, note the current settings in order to ease ...

...adjusting the headlights on a 2003 Olds Alero, it appears there is only one set of adjusters for both the high and low beam. When the low beams are good, the high beams are too high, when the high ...

...high beam. I have to jiggle the hi-lo beam stick to keep them on lo.-2004 alero my low beams won't always stay on low at night!they want to go to high beam. I have to jiggle the hi-lo beam ...

99 olds alero. Headlight on passenger side don't work. Replaced bulb still don't work. High beams work and so does all the other lights. What could it be. Replace the plug that connects to the bulb.

high beam. Presently have HID lights and when i switch from low beam to high beam the low beams go off and the high beams take about 15 seconds or so to come on . so no lights for that period of time

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...