Questions & Answers for: adjusting the belt Cars & Trucks

...set belt tension to 135 lb. click here for picture 1 click here for picture 2 Dont forget to unloosten the 15mm fulcrum bolt in addition to the two adjusting bolts or the bracket will not adjust. ...

...belt by rotating the adjusting bolt until the correct tension is reached. Refer to the procedure earlier in this section for belt adjustment. Once the desired tension is reached, secure the locknut. ...

...BELT Loosen the alternator adjusting bolt. Raise and safely support the vehicle. Loosen the alternator mounting bolt. NOTE: Do not pry against the stator frame. Position the prybar against a stronger ...

...adjusting belt tension. The adjustment bolt should turn with moderate force. After adjustment is satisfactory, tighten the idler pulley bolt, and then tighten the adjustment bolt. Reconnect the ...

97 nissan maxima replace power steering belt Easy to do, but also easy to do wrong. 1. Find the belt. 2. Find the belt tensioner. 3. Find the belt tensioner adjuster screw. 4. Loosen the adjustment ...

...belt tension by tightening the adjusting screw. Tighten the pulley nut to 40 ft. lbs. (54 Nm) after adjustment. Install the alternator/power steering and water pump drive belt and adjust. Start the ...

...belt adjusting nut as required until the proper deflection is obtained. Turning the adjusting nut clockwise will increase tension and decrease deflection; counterclockwise will decrease tension and ...

...adjusting, inspect the belt to see that it is not cracked or worn. Be sure that its surfaces are free of grease and oil. If contamination is present, belt replacement is recommended.Push down on the ...

...belt tension by tightening adjusting screw. Torque pulley nut to 54 N•m (40 ft. lbs.) after adjustment. The Poly-V generator/power steering belt has an adjustable tensioner pulley located on the ...

...belt, loosen the adjusting bolt or fixing bolt locknut on the alternator, alternator bracket or tension pulley. Then move the alternator or turn the adjusting bolt to adjust belt tension. Once the ...