...likely your problem is from storage. The air is thinner at 7000ft, so it will only be air mixture adjustment. You need to prepare your bike for storage! I would remove the carby, remove the bottom ...
...mixture setting ? and the needle position ? Yamaha ttr250 2004 bike runs on choke but when you turn it off bike cuts out like it runs out of fuel Hi, You have a closed mainjet (need cleaning) as for ...
...loose or broken wire connector pins/sockets. 8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM. 9. Air/fuel mixture screw improperly
...sticking. 6. Float level too low. 7. Carburetor bowl vent line clogged/blocked/pinched. 8. Idle adjusting screw set too low. 9. Air/fuel mixture screw set too lean. 10. Idle port, transfer ports, ...
...sticking. 5. Float level too low. 6. Carburetor bowl vent line clogged/blocked/pinched. 7. Idle adjusting screw set too low. 8. Air/fuel mixture screw set too lean. 9. Idle port, transfer ports, ...
Usually answered in minutes!
102 Questions
7 Questions
8 Questions
