Questions & Answers for: GMC Sierra 1500HD abs light

Question about GMC Sierra 1500HD

2 Answers

no tail lights. All other lights fine. checked fuse, fine. checked bulbs, fine - HELP So you mean that you have no tail lights but you have your brake, turn and emergency lights? If so it sounds like ...

Ad

Question about 2005 Sierra 1500HD

1 Answer

...along the harness from the engine compartment to the rear (a possibility).To test for the presence/absence of voltage when the brake pedal is stepped on, a test light is preferred rather than a ...

Ad

...the emergency brake.. disengage it.. take the vehicle to a brake shop for the abs light the ABS has to be put on a diagnostic tool.then you will know what to do.The brake and abs light are

When braking, at below 5mph, it sounds like the ABS is kicking in. The ABS indicator on the dash does NOT come on at all when this happens. A C0201 is indicated from the vehicles computer, can't find ...

ABS and brake light comes on when truck is driven brakes are at 70% and work fine just lights come on on message center after truck is driven about 5 min's. truck is a 2001 gmc 1/2 ton sierra with ...

Question about 2001 Sierra 1500HD

1 Answer

Brake lights work, headlights and front markers work, no tail lights or license plate lights...HELP, I checked my fuses they look fine. I replaced head light switch... faulty head lamp switch you have

Where is the ABS computer located on a 2001 GMC Sierra? If you look at the master cylinder under the hood on the drivers side,you should see an aluminum box near the brake reservoir,that is the ...

my rear brake lights dont work only the cab light, gmc sierra 6 cyl, what can I look for your rear stop lights are on a different fuse from the cab stop light. Look in the box under the hood for a ...

where is the brake relay on a 2001 gmc sierra. no brake lights on bed. Third brake light working Try wiggling the hazard light switch while pressing on the brakes.The taillights are connected to the ...

Question about 2001 Sierra 1500HD

1 Answer

EHCU ABS IS it possible to remove the ecu with out taking the hcu loose from the lines? yes under cab on frame with torx bit without removing lines remove connectors 2 and remove torx bolts then ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...