Questions & Answers for: Pontiac Grand Am abs codes

Question about 1999 Grand Am GT

5 Answers

...abs codes need to be read. If there is no codes that don't mean that there isn't a problem. The tech2 scanner is designed to see the signal from the wheel speed sensor while drivingthe car. The ...

Ad

Question about 2000 Grand Am GT

2 Answers

...codes. This problem sounds like and ABS module that has gone bad, the ABS module has toothed gears inside that actuate the ABS motor, if one of these gears slips a tooth or "unwinds" itself if will ...

Ad

abs light and trac off light both came on dash at same time My abs and trac off light are both on on dash, dont notice any change in driving. These two are linked together the abs light is probably on

...Any ideas? all three lights are on because of an abs problem,have the abs system scanned for codes and that should point you in the right direction,usually a front abs sensor problem,hope this ...

...wheel bearing noise from bad bearings have also been known for interferring with clean abs signal also causing abs codes good luck abs an trac control light on replaced abs wheel sensor lights still ...

...body control module has found something wrong,get the code and get back to me. most scanners at the parts stores will not read ABS codes. Hope this helps get back to me Thanks Ray, please rate my

Question about 1996 Grand Am

1 Answer

ABS system, 9 out of 10 times it's going to be a speed sensor to one of your wheel's, take it to any auto parts or some one like autozone so they can pull codes out, they will do this of free, if your

Question about 2000 Grand Am GT

1 Answer

...system which is affected by suspension movement.A code reader which does abs codes will tell you which wheel circuit is turning on the abs light.When there is no abs available the track will turn

...ABS computer is quite a bit more expensive than one that will read engine fault codes. I would suggest taking the car to a mechanic and paying to have the codes retrieved, then you can decide if you ...

...know what is up now could some one please help Were you able to read the ABS trouble codes? I have pasted the codes below. You might want to check the torque on the wheel bearing bolts and axle

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...