Questions & Answers for: Oldsmobile Bravada abs codes

...the ABS problem it would start working but no good. Wonderin what the next step would be to solve the problem... If the smarttrack light is on, trouble codes are stored. That's your starting

Service Engine soon light and Service AWD ligths are on, also the abs light ABS light is on due to a bad or dirty ABS sensor on the front wheel hub. Inspect the front wheel ABS sensor and wire leads ...

ABS and brake light on-- transmission does not change gear 2002 Oldsmobile Bravada: ABS and brake light on-- transmission does not change gear. Problem occurred suddenly while driving on highway--you ...

...ABS codes using and ODB-II scanner with ABS support. THis will point you closer to the issue. It is likely one of the wheel speed sensors not reporting. Could be (many times) just the wiring harness ...

...CODES ON THE OBD 2 DLC SYSTEM THE OLD OBD 1 DLC SYSTEMS YOU COULD DISCONNECT NEGATIVE BATTERY FOR 1 MINUTE.BUT THE OBD2 SYSTEMS YOU NEED A CODE SCANNER.IF ABS LIGHT TURNING ON.EITHER YOUR WHEEL SPEED ...

...area will not give me any codes for the abs brake system. Is there another code reader outlet? Some part's store are able to read ABS code ! \A wheel bearing going bad can cause false ABS activation

abs light comes on then transmission shifts into low?????? whats causing this FIrst I suggest scanned the ABS module in order to know what fault code is stored there; note this code and send us for ...

smart track will not work that system uses the speed sensors from the abs to operate if the abs light is on check that system for codes first

...ABS module scanned for trouble codes. It may be necessary to have the light on at the time the codes are retrieved. It's possible and common for a loose wheel bearing cause this symptom. Let me know ...

ABS Module error codes? I have replaced the right front ABS speed sensor according to the error code I received. I have also checked and cleaned the EBCM Ground located on the frame beneath the driver